| There are many varieties of hammers used as | | | | cm long flat head screwdriver that is constructed |
| tools in watch making – hammers and mallets. | | | | of stainless steel, at the end of which another 15 |
| The Brass and Metal Planishing Hammer weighs | | | | cm screwdriver with a steel shaft is present. This |
| about 55 grams and measures 30 cm in length. It | | | | once again screws down to an 8 cm long screw |
| has a solid steel head and a steel collet screws on | | | | driver with another 6 cm precision screw driver |
| a metal and brass head, each around 2 cm, to it. | | | | at the end. It is a multi purpose, high quality and |
| It has a key which can be used to take off the | | | | smart tool to help watch makers. |
| collet to release either of the metal or brass | | | | The Bergeon Boxwood Mallet is well suited to |
| heads. With a Brass and Plastic Planishing Hammer, | | | | replace bracelet pins; there is no risk of scratching |
| there is a Nylon Plastic and brass head. | | | | the metal finish. It is a sturdy tool which lasts long; |
| The Solid Brass Repousse Hammer with a Twist | | | | it has an ergonomic design to make it |
| comes with a 4 piece stainless steel screwdriver | | | | comfortable for use. The mallet faced is large and |
| set. The hammer head is of brass and is | | | | flat and it also has a conical nose that can be |
| approximately 6oz. There is an internal screw that | | | | used for precision driving. |
| splits the handle and the shaft. There is a solid 25 | | | | |